Instructions / Assembly

Assembly Instruction

STEP 12

Once set up, you can adjust the pump water flow rate control to achieve the desired

effect (see step 2 for adjustment) and enjoy your new fountain.

NOTE: Don’t forget to add water regularly as water will evaporate over time.

NOTES: 1. Make sure there is no water on the power plug.

2. Allow the pump power cord to hang at a lower level than the wall outlet to form a “drip

loop.” This will help to prevent water from dripping down the power cord and getting into

the wall outlet.

STEP 11

Connect the Power Plug (D) into your local power supply.

DRIP LOOP