Instructions / Assembly

Assembly Instruction
3
PLEASE CAREFULLY UNPACK AND IDENTIFY EACH COMPONENT BEFORE BEGINNING ASSEMBLY. BEFORE YOU BEGIN, PLEASE
REFER TO PARTS LIST TO MAKE SURE THAT YOU HAVE ALL PARTS.
STEP-BY-STEP ASSEMBLY
STEP 1
Place the Fountain Base (B) on a flat, level surface close to an electrical outlet.
Allow enough space to access the pump.
STEP 2
Remove the Pump Cord (C) from the packaging and adjust the water flow control to
the lowest setting to avoid splashing until the fountain is completely assembled.
WATER FLOW RATE CONTROL: The water flow rate can be increased (+) or decreased (-) by
moving the flow rate control on the pump body, adjust the pump flow rate to achieve the desired effect.
B
A C D E F
Flow rate control
MIN
MAX
Min. water level