Instructions / Assembly

Assembly Instruction
2
PARTS LIST
Top Ball (A)
Qty: 1
Fountain Base (B)
Qty: 1
Pump Cord (C)
Qty: 1
Power Plug (D)
Qty: 1
Black Lid (E)
Qty: 1
Pebble (F)
Qty: 1
11. The fountains are not manufactured to withstand extreme temperatures. Improper storage
that allows water to freeze within a product may cause damage.
12. Keep the fountain away from high temperatures or heat sources.
13. Do not use the pump in water above 86°F (30℃).
14. Disconnect the power cord from the outlet by holding the plug. Do not lift, carry, or pull the
pump by the power cord.
15. If the entire fountain falls into the water accidentally, turn off the circuit breaker immediately.
16. If any leakage occurs around the pump housing, turn off the circuit breaker immediately and
have the pump serviced by a registered technician.
17. Do not operate the fountain if the pump has been dropped or has a damaged power cord or
plug. Do not replace the power cord.
18. Keep the plug dry. Do not expose the plug to water or steam. Do not use the pump in
swimming pool or marine area.
19. If the plug or the wall receptacle gets wet due to water dripping down the power cord or for
any other reason, do not remove the plug from the wall outlet until the circuit breaker is
turned off.
20. Do not expose the pump to direct sunlight or to low temperatures for any period of time.
21. Use only a UL-approved extension cord of the correct rating to avoid overheating.
22. Do not use attachments that are not provided by the manufacturer since they may cause an
unsafe condition.
23. Do not use the pump for anything other than its intended use.