Instructions / Assembly

8
STEP 10
REQUIRED HARDWARE IN THIS STEP
NO. DESCRIPTION SKETCH QTY
STEP 9
K
Insert cam lock (2) into left
wood panel (F) and right wood
panel (G) and fully tighten with
phillips screwdriver.
Carefully turn the assembled parts over as shown in the diagram. Place a small dab of glue
(11) into the outside holes of the edges of left wood panel (F) and right wood panel (G) and
insert wood dowels (10) into the holes.
4PCSWOOD DOWEL10
GLUE11
10
10
10
10
11
11
11
11
REQUIRED HARDWARE IN THIS STEP
NO. DESCRIPTION SKETCH QTY
PHILLIPS SCREW DRIVER NOT INCLUDED
2 CAM LOCK
4PCS