Instructions / Assembly

7
STEP 7
K
REQUIRED HARDWARE IN THIS STEP
NO. DESCRIPTION SKETCH QTY
4PCSWOOD DOWEL10
GLUE11
10
10
2
F
M
G
Carefully set the
assembled panels upright
as shown in the diagram.
Place a small dab of glue
(11) into the outside holes
of the edges of left wood
panel (F) and right wood
panel (G) and insert wood
dowels (10) into the holes.
STEP 8
Align the cams (1) in the top
panel (K) with the holes in Left
wood panel (F) and right wood
panel (G) and lower into place.
11
11