Instructions / Assembly

18
14
WALL
15
NOT INCLUDED
12
NOT INCLUDED
WALL
13
NOT INCLUDED
WALL
STEP 26
Attach steel plate (15 ) to top panel (K) with
screw (8) using screwdriver. Place assembled
unit in desired position. Mark position of steel
plate (15) on wall and remove unit. Drill one
hole on the wall and then put wall anchor (13)
into the predrilled hole. Attach steel plate (15)
to wall anchor (13) with screw (14) using
screwdriver.. Place unit back into position.
Attach anti tipping strip (12) to steel plates (15)
as shown.
8
12
PHILLIPS SCREW DRIVER
NOT INCLUDED
NO. DESCRIPTION SKETCH QTY
REQUIRED HARDWARE IN THIS STEP
2 PCS
1 PC
1 PC
1 PC
PHILLIPS SCREW Ø 4*25mm14
13
WALL ANCHOR Ø8.5*30mm
12
ANTI-TIPPING STRIP
15 STEEL PLATE
PHILLIPS SCREW Ø4*12mm
8
1 PC