Instructions / Assembly

5
Assemble steel plate (9) to top panel (B) with allen bolt (1) using Allen wrench (7).
STEP 5
Drill one hole on the wall and then put wall anchor (11) into the pre-drilled hole. Assemble steel
plate (9) to the wall with screw (12) using screwdriver. Attach anti-tipping strip (10) to the steel
plate (9) as shown.
STEP 6
REQUIRED HARDWARE IN THIS STEP
NO.
DESCRIPTION
SKETCH QTY
1PC1
ALLEN BOLT M6*12MM
1PC9
STEEL PLATE
1PC7 ALLEN WRENCH
REQUIRED HARDWARE IN THIS STEP
NO.
DESCRIPTION
SKETCH QTY
1PC9
STEEL PLATE
1PC10
ANTI-TIPPING STRIP
1PC
1PC
11
12
WALL ANCHOR Ø8.5*30MM
SCREW M4*25MM
9
B
1
10
NOT INCLUDED
WALL
11
NOT
INCLUDED
WALL
12
WALL
10
NOT INCLUDED
9
WALL