Instructions / Assembly

4
Attach the remaining ends of the rear cross bars to the back side of the assembled shelves
with Phillips screws (5) . Fully tighten the screws by screwdriver (not included).
STEP 3
REQUIRED HARDWARE IN THIS STEP
NO.
DESCRIPTION
SKETCH QTY
4PCS5
7
PHILLIPS SCREW 4*12mm
PHILLIPS SCREW DRIVER
REQUIRED HARDWARE IN THIS STEP
NO.
DESCRIPTION
SKETCH QTY
6PCS
1PC
3
ALLEN BOLT M6*30MM
ALLEN WRENCH
Not
included
Assemble top panel (B) & shelf panel (A) on ready metal frame with Allen bolts (3) by using
Allen wrench (7).
STEP 4
5
5
5
5
3
3
3
3
3
3
A
A
B
The hole on top panel (B)
should be on the bottom
and same side as x steel
wire (F).