Assembly Instruction 3 SHELF BOOKCASE
PRE-ASSEMBLY PREPARATION • CAUTION: Assembly will require at least 2 adults. DO NOT use power tools. Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly return it in it's original packaging. • WARNING! 1. DO NOT let any sharp objects touch or rub the surface of the product. 2. When assembling, do not let children play around the working area. 3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up. 4.
PARTS LIST SHELF PANEL (A) TOP PANEL (B) Qty: 2 RIGHT METAL FRAME (E) SHELF CROSS BAR (C) Qty: 1 LEFT METAL FRAME (D) Qty: 3 Qty: 1 REAR CROSS BAR (F) Qty: 1 Qty: 4 HARDWARE LIST ALLEN BOLT (1) ALLEN BOLT (2) ALLEN BOLT (3) ALLEN BOLT (4) M6*12mm M6*22mm M6*28mm M5*15mm Qty: 1 Qty: 6 Qty: 6 PHILLIPS SCREW (5) NUT (6) ALLEN WRENCH (7) 4*12mm M5 4mm Qty: 4 Qty: 1 Qty: 1 OPEN END WRENCH (8) Qty: 1 Qty: 1 L STEEL PLATE (9) ANTI-TIPPING STRIP (10) WALL ANCHOR (11) SCREW (12) 1
REQUIRED HARDWARE IN THIS STEP STEP 1 NO. DESCRIPTION SKETCH QTY 2 ALLEN BOLT M6*22mm 6PCS 7 ALLEN WRENCH 1PC Assemble shelf cross bar (C) to right metal frame (E) and left metal frame (D) with allen bolt (2) using allen wrench (7). 2 C 2 E C E C 2 C line up with the inside D C 2 2 C 2 These 4 holes must be one side REQUIRED HARDWARE IN THIS STEP STEP 2 NO.
REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 5 PHILLIPS SCREW 4*12mm 4PCS PHILLIPS SCREW DRIVER Not included STEP 3 SKETCH QTY Attach the remaining ends of the rear cross bars to the back side of the assembled shelves with Phillips screws (5) . Fully tighten the screws by screwdriver (not included). 5 5 5 5 REQUIRED HARDWARE IN THIS STEP STEP 4 NO.
REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 1 ALLEN BOLT M6*12MM 1PC 9 STEEL PLATE 1PC 7 ALLEN WRENCH 1PC STEP 5 SKETCH QTY Assemble steel plate (9) to top panel (B) with allen bolt (1) using Allen wrench (7). B 9 1 REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 9 STEEL PLATE 1PC 10 ANTI-TIPPING STRIP 1PC 11 WALL ANCHOR Ø8.5*30MM 1PC 12 SCREW M4*25MM 1PC STEP 6 SKETCH QTY Drill one hole on the wall and then put wall anchor (11) into the pre-drilled hole.
STEP 7 WALL 6
