Instructions / Assembly

4
Attach the remaining ends of the rear cross bars to the back side of the assembled shelves
with Phillips screws (5). Fully tighten the screws by screwdriver (not included).
STEP 4
REQUIRED HARDWARE IN THIS STEP
NO.
DESCRIPTION
SKETCH QTY
4PCS5
PHILLIPS SCREW 4*12mm
PHILLIPS SCREW DRIVER
Not
included
4
5
5
5
Assemble all rear cross bars (F) together at one end with Allen bolts (4) and nut (6) using
Allen wrench (7) and Open end wrench (8). Fully tighten in this step.
STEP 3
REQUIRED HARDWARE IN THIS STEP
NO.
DESCRIPTION
SKETCH QTY
1PC4
ALLEN BOLT M5*15MM
1PC6
NUT M5
1PC7 ALLEN WRENCH
1PC8 OPEN END WRENCH
6
H
H
H
H
5