Instructions / Assembly

ManualsBrandsGlitzhome ManualsDesks43.25 in. W Black Modern Industry Metal/Wooden Writing Desk With 1 Outlets and 2 USB Charging Ports- Oak Melamine

Summary of content (11 pages)

PAGE 1
glitz home’ Glitz home Corporation (Shanghai), Ltd. Assembly Instruction 2 DRAWER DESK WITH TEARING Carefully unpack and Identify each component before beginning assembly. Before you begin, please refer to pairs list to make sure that you have all parts. Please take care when assembling the unit and always place the parts on a clean, soft surface.
PAGE 2
glitz home’ atm CAUTION: Assembly will require at least 2 adults. DO NOT use power tools. Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly rectum it in it's original packaging. * WARNING! 1. DO NOT let any sharp objects touch or rub the surface of the product. 2. When assembling, do not let children play around the working area. 3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up. 4.
PAGE 3
glitz home’ BOTTOM CROSSBAR | BACK TOP CROSS BAR | REAR X STEEL BAR (C) | FRONT TOP CROSS BAR A) ®) 0) Qty: 1 Oty: 1 Qty: 2 Qty: 1 LEFT LEG (E) RIGHT LEG {F) DRAWER BOTTOM TOP PANEL (H) PANEL (G) Qty: 1 Qty: 1 Qty: 2 \ Qty: 1 BOTTOM PANEL (I) BACK PANEL (J) LEFT PANEL (K) RIGHT PANEL (L) aty: 1 Qty: 1 Qty: 1 aty: 1 MIDDLE VERTICAL DRAWER FRONT PANEL | DRAWER LEFT PANEL | DRAWER RIGHT PANEL PANEL Qty: 1 Qty: 2 Qty: 2 Qty: 2 DRAWER BACK PANEL Q Qty: 2 Ll TT CAM (1) CAM LOCK (2) PHILLIPS SCREW (3) UMBRELLA HEA
PAGE 4
glitz home’ WOOD DOWEL (5) ALLEN BOLT (6) ALLEN BOLT (7) ALLEN WRENCH (8) 26*30mm M6*12mm M6*30mm M6*30mm SO & Qty: 20 Qty: 8 Qty: 6 Qty: 1 DRAWER HANDLE (9) PHILLIPS SCREW (10) NOT INCLUDED 4*15mm Qty: 2 Qty: 3 REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 1 CAM PCS 5 *, 0 PCS STEP 1 WOOD DOWEL 6*30MM CT Insert cam (1) into top panel (H) using Phillips screwdriver (not provided} and full tighten. Insert wood dowel (5) into top panel (H).
PAGE 5
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 5 WOOD DOWEL 6*30mm C—D PCS STEP 2 Assemble left side panel (K) and right side panel (L) to back panel (J) using wood dowels (5). L REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 2 CAM LOCK @15*9mm ® PCS Not STEP 3 PHILLIPS SCREW DRIVER SSE— included Insert cam lock (2) into holes of side panel (L), side panel (K) and back panel (J).
PAGE 6
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 1 CAM PCS 2 CAM LOCK 215*9MM ® PCS STEP 4 5 WOOD DOWEL 6*30MM C0 PCS Insert cam (1) into top panel (H) using fillips screwdriver (not provided ). Insert wood dowel (5) into top panel (H) and insert cam lock (2) into holes of middle panel (M). Carefully place middle panel (M) onto top panel (H). Tighten cam locks (2) with fillips screwdriver (not provided). REQUIRED HARDWARE IN THIS STEP NO.
PAGE 7
glitz home’ STEP 5 Insert wood dowel (5) into side and back panels (L & K) and (J) . Carefully place bottom panel (G) onto side and back panels (L & K) and (J) . Secure bottom panel in place with fillips screw (3) using fillips screwdriver (not provided). Fully tighten all screws. REQUIRED HARDWARE IN THIS STEP NO.
PAGE 8
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 7 ALLEN BOLT M6*30mm Dad PCS STEP 7 8 ALLEN WRENCH = 1PC Assemble back bottom cross bar(A) on left leg (E) and right leg(F) with Allen bolts (7) by using Allen wrench(8). . These three holes must A be same side. REQUIRED HARDWARE IN THIS STEP NO.
PAGE 9
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 7 ALLEN BOLT M6*30mm Dad PCS STEP 9 8 ALLEN WRENCH = 1PC Carefully place the assembled metal frame onto the bottom panel (G) and attach with Allen bolts (7) using Allen wrench (8). REQUIRED HARDWARE IN THIS STEP NO.
PAGE 10
glitz home’ REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION SKETCH QTY 1 CAM EID PCS UMBRELLA HEAD BOLT 4 M4*18MM Ce PCs 8 HANDLE <7 1PC Not STEP 11 PHILLIPS SCREW DRIVER e=e— | Nt, Attach handle (9) to drawer front panel (N) with umbrella head bolts (4) and assemble cam (1) on drawer front panel (N) using fillips screwdriver (not provided). REQUIRED HARDWARE IN THIS STEP NO.
PAGE 11
glitz home’ STEP 13 Align the glides on the drawers with glides in the assembled drawer box. Carefully insert the drawer. Note: If the drawer needs to be removed, depress the plastic levers on the drawer glides and hold to release the drawer. PLEASE NOTE: The drawers should slide completely into desk. If drawers jam or bind, remove them, realign the glides and reinsert.