Assembly Instruction CONSOLE TABLE
PRE-ASSEMBLY PREPARATION • CAUTION: Assembly will require at least 2 adults. DO NOT use power tools. Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly return it in it's original packaging. • WARNING! 1. DO NOT let any sharp objects touch or rub the surface of the product. 2. When assembling, do not let children play around the working area. 3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up. 4.
PARTS LIST BACK X STEEL BAR (A) BACK TOP CROSS BAR (B) Qty: 2 BACK BOTTOM CROSS BAR (E) FRONT TOP CROSS BAR FRONT BOTTOM CROSS (C) BAR (D) Qty: 1 BOTTOM PANEL (G) TOP PANEL (F) Qty: 1 Qty: 1 Qty: 1 LEG FRAME (H) Qty: 1 Qty: 1 Qty: 2 HARDWARE LIST ALLEN BOLTS (1) PHILLIPS SCREW (2) PHILLIPS SCREW (3) ALLEN WRENCH (4) M6*12mm 5*12mm 4*15mm 4mm Qty: 8 Qty: 12 Qty: 3 Qty: 1 NOT INCLUDED 2
REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 1 ALLEN BOLT M6*12mm 4PCS 4 ALLEN WRENCH 1PC STEP 1 SKETCH QTY Assemble front top cross bar (C) and back top cross bar (B) on leg frame (H) with Allen bolts (1) by using Allen wrench (4). Please don't tighten all screws until process step 2 ! 1 C 1 B H 1 1 H H These two holes must be outside H REQUIRED HARDWARE IN THIS STEP STEP 2 NO.
REQUIRED HARDWARE IN THIS STEP NO. DESCRIPTION 3 PHILLIP SCREW 4*15mm 3PCS PHILLIPS SCREW DRIVER Not included STEP 3 SKETCH QTY Assemble back X steel bar (A) to the back top cross bar (B) and back bottom cross bar (E) with phillips screw (3) by using Screwdriver. 3 A B A 3 3 E STEP 4 Carefully place top panel (F) on the assembled frame. Please make sure the top crossbars are flush with the top crossbars of the legs before placing top panel on assembled frame.
REQUIRED HARDWARE IN THIS STEP STEP 5 NO. DESCRIPTION SKETCH QTY 2 PHILLIP SCREW 5*12mm 6PCS PHILLIPS SCREW DRIVER Not included Tighten phillips screw (2) using Phillips screwdriver (Not Included). 2 2 2 2 2 2 2 STEP 6 Carefully place bottom panel (G) into the assembled frame.
REQUIRED HARDWARE IN THIS STEP STEP 7 NO. DESCRIPTION SKETCH QTY 2 PHILLIP SCREW 5*12mm 6PCS PHILLIPS SCREW DRIVER Not included Tighten phillips screw (2) using Phillips screwdriver (Not Included).
