Assembly Instruction BAR STOOL
PRE-ASSEMBLY PREPARATION • CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. • MAINTENANCE: Check bolts/screws periodically and tighten them if necessary. • WARNING: DO NOT USE if this product become damaged, and/or components are broken or missing. • REMINDER: DO NOT fully tighten all bolts until assembly is completely finished.
STEP 1 Attach the Legs (C) to the Base Frame (B) by using Allen Bolts (E) and Allen Wrench (H). B E H C STEP 2 Attach the Footrest (D) to the Legs (C) by using Allen Bolt (G) and Allen Wrench(H).
STEP 3 Attach the Seat (A) to the Bottom Frame (B) by using Allen Bolt (F) and Allen Wrench(H). A F H After initial assembly, the product may acclimate to its new environment. Please ensure all screws are still securely tightened.
