User Manual

The scooter cover also serves as a storage pouch for the cover. The cover can be stuffed into a

sewn pouch located inside of the cover. First, access the pouch from the opening in the cover for

the retractable handle and carefully reverse the pouch so you can see the pouch’s glion logo. Stuff

the scooter cover inside of the pouch. The pouch’s Glion logo should continue to face outside.

Once the cover is completely stuffed inside of the pouch, pull the cover straps and snap for a

carrying handle.

WARNING: Check to make sure the dolly handle is fully

retracted into the board and locked into place before operating the

scooter. Failure to do so could result in serious injury or death.

GLĪON ELECTRIC SCOOTER MAINTENANCE

MECHANICAL:

1. Due to vibration, nuts and bolts can become loose. Make sure that all lug nuts, other

nuts and bolts are securely fastened and tighten them if necessary. To test: Pick your

scooter up 1-2 inches and bounce it off the ground. Do a quick visual and tactile

inspection of the whole scooter. Make sure you inspect all visible nuts, bolts, and

structural welds. If anything sounds, feels, or looks loose, or shows signs of stress

replace or secure them.

WARNING: Like any mechanical device, an electric scooter

and its components are subject to wear and stress. Different

materials and mechanisms wear or fatigue from stress at difference

rates and have different life cycles. If a component’s life cycle is

exceeded, the component can suddenly and catastrophically fail,

causing serious injury or death to the rider. Scratches, cracks, fraying

and discoloration are signs of stress-caused fatigue and indicate that a

part is at the end of its useful life and needs to be replaced. While the

materials and workmanship of your electric scooter or of individual

components may be covered by a warranty for specified period of time by