User Manual

18
SCOOTER COVER (OPTIONAL ACCESSORY)
1. Cover Installation and Removal
Fold your Glion Electric Scooter and place it horizontally on the floor and drape the cover over the
front tire and across the scooter.
Pull the bottom of the cover over the T-bar so the cover now extends from the front tire on one
side to the bottom of the T-bar on the other side.
Tilt your scooter upright and zip the cover down to the rear tire.
2. Handlebar Carrying Access
The scooter cover has two slits in the side so you can easily carry the scooter holding the lower
handlebar downtube.
3. Cover Storage Pouch
To Remove the Scooter Cover Reverse the Installation Steps.