User Manual

DOLLY FEATURE

You must press the center button of the dolly handle to extend it from the board or retract it into

the board. When you fully retract the dolly handle into board, make sure the handle locks into the

operating position and is secure so that it cannot be retracted without first pressing the center

button on the dolly handle.

The dolly handle has three positions. Position 1: The closed position. In this positon, the dolly

handle is fully retracted into the board and locked into place so that it cannot be extended without

first pressing the center button. Position 2: The dolly handle is partially extended. This position

is designed for ease in carrying the folded scooter in the vertical standing position (i.e.: up a set of

stairs). Position 3: The dolly handle is fully extended. This position is for rolling the folded

scooter behind or next to you. (The wheelies allow the scooter to roll by your side and also to

stand vertically with the wheelies and the T-bar as the base.)

Dolly in the Vertical Standing Position

Center Button of

the Dolly Handle