User's Manual

Figure 7
This is the TELESCOPING POST removed from the
CENTRAL POST.
(See Figure 7)
NOTE: There is no need to remove this unless
removing your GIMBAL for cleaning. To remove the
TELESCOPING POST from your CENTRAL POST, you
will need to loosen and remove your TELESCOPING
POST CLAMP.
Figure 8
Shown are the COUNTER WEIGHT PLATES to be
attached to the EXPANDABLE BASE PLATFORM.
(See Figure 8)
Figure 9
Shown in the bag is the HARDWARE set for the
Glidecam Devin Graham Signature Series.
(See Figure 9)
8