User's Manual

#2 GLIDECAM DEVIN GRAHAM SIGNATURE

SERIES PARTS AND COMPONENTS

Figure 1

When you unpack your Glidecam Devin Graham

Signature Series you will see that some Assembly

is required. The contents of the Glidecam Devin

Graham Signature Series box includes the following:

(See Figure 1)

MANUAL

CENTER POST

DOVETAIL QUICK RELEASE PLATE

CAMERA MOUNTING PLATFORM

EXPANDABLE BASE PLATFORM

TELESCOPING POST

HARDWARE BAG

COUNTER WEIGHTS

NOTE: The TELESCOPING POST comes inserted into

the CENTRAL POST when shipped.

Figure 2

This is the Glidecam Devin Graham Signature

Series CENTRAL POST with attached Gimbal

assembly.

(See Figure 2)

WARNING: Do not adjust or tighten the factory settings

on the Gimbal, Handle, or Yoke. These parts should

remain loose and move freely, for proper operation.

Figure 3

These are the pieces that makeup the HEAD

ASSEMBLY of the Glidecam Devin Graham

Signature Series

1) DOVETAIL QUICK RELEASE PLATE

2) CAMERA-MOUNTING PLATFORM

(See Figure 3)