User's Manual

Figure 50

The Glidecam Devin Graham Signature Series is

designed to work correctly only when operated with

two hands. (See Figures 48 and 50) If you try to

operate the unit with just your “HOLDING HAND”

(See Figure 47), the camera will most likely drift away

from it’s original position. Without your “GUIDING

HAND” in place, you will be unable to control the

direction of the camera.

#7 OPERATING YOUR GLIDECAM DEVIN

GRAHAM SIGNATURE SERIES

NOTE: You can also attach an external LCD MONITOR to the accessory shoe on the top of your

Camcorder. We believe that better results are obtained when you attach the Monitor to the Devin

Graham Signature Series’s base, (See Figure 51) because this way you generally have to look

slightly down to see the Monitor. In doing so, your feet are more visible to your peripheral vision.

This makes negotiating obstacles with the Devin Graham Signature Series safer.

When operating the Glidecam Devin Graham

Signature Series you will not be able to put your eye

right up to the eye cup on the viewnder. For doing

so will cause the unit to be restricted in it’s ability to

stabilize and eliminate camera shake. Even though

you cannot place your eye directly up to the camera

viewnder, you can either use the Camera’s built-in

LCD MONITOR or attach an external LCD MONITOR

(not included) directly to the BASE PLATFORM

of the Devin Graham Signature Series. A 1/4”

Monitor “MOUNTING HOLE” is located at both

the front and back edges of the BASE PLATFORM.

(See Figure 51)

Figure 51