User's Manual

Figure 41

If the Glidecam Devin Graham Signature Series

leans to the right, then you will have to turn the side-to-

side ADJUSTMENT KNOB counterclockwise. If the

Glidecam Devin Graham Signature Series leans to

the left from the operator’s point of view (See Figure

41) then move it to the right by turning the side to side

ADJUSTMENT KNOB clockwise. Always secure

and rmly tighten the DOVETAIL QUICK RELEASE

PLATE LOCK after any adjustment. The side-to-side

horizontal axis is shown correctly adjusted.

(See Figure 42)

After adjusting the side to side balance as mentioned

above, you might have to go back and readjust the

front to back balance, to obtain a truly ne balance

of the whole system. You can use your eyes to judge

for correct horizontal balance, or you can use a small

and lightweight bubble level, (not included) to ensure

the Glidecam Devin Graham Signature Series has

correct horizontal balance.

Figure 42

NOTE: The Horizontal Balance of the Glidecam Devin

Graham Signature Series becomes less sensitive

as the Glidecam Devin Graham Signature Series

becomes increasingly bottom heavy, and conversely,

the horizontal balance becomes very sensitive, as the

Devin Graham Signature Series progresses towards

correct vertical balance.