User's Manual

Figure 27

The second method to correctly align the parts is to use an Allen Wrench to loosen the

“Screw” on the top part (See Figure 26) of the TELESCOPING CLAMP until you can rotate

the parts so they are correctly aligned, then simply re-tighten the screw.

(See Figure 27)

NOTE: The second method of alignment is better because it keeps the TELESCOPING

CLAMP ADJUSTMENT KNOB aligned correctly (See Figure 21). Having the TELESCOPING

CLAMP ADJUSTMENT KNOB aligned correctly, although not technically needed to make

your Glidecam Devin Graham Signature Series function correctly, does make it easier to

reach the TELESCOPING CLAMP ADJUSTMENT KNOB later when in use.