User's Manual

Figure 21
The TELESCOPING CLAMP ADJUSTMENT
KNOB should be aligned with the center of the
EXPANDABLE BASE PLATFORM. To align
the TELESCOPING CLAMP ADJUSTMENT
KNOB simply rotate the entire CENTRAL
POST into the correct position, and tighten the
ADJUSTMENT KNOB. Also leave about one
inch of the TELESCOPING POST showing
below the TELESCOPING CLAMP. Having the
TELESCOPING CLAMP ADJUSTMENT KNOB
aligned correctly, although not technically needed
to make your Glidecam Devin Graham Signature
Series function correctly, does make it easier to
reach the knob later when you use it.
(See Figure 21)
Figure 22
Securely tighten the ADJUSTMENT KNOB on
the TELESCOPING CLAMP by rotating the knob
clockwise.
(See Figure 22)
NOTE: The ADJUSTMENT KNOB should only be
tightened by hand.
WARNING: Do not over tighten the ADJUSTMENT
KNOB as it could cause thread stripping.
14