User Manual

Slide in the handlebar quick release above the Yaw
Motor.
8
Figure 6
Figure 7
Securely tighten the knob.
Figure 5
Insert and secure the self locking screws (20mm)
onto both grips.
**NOTE**: The Glidecam CENTURION includes two different
kinds of screws. The longer screw (20mm) is for the grip
and the shorter screw (15mm) is for securing the handle
posts in place.
Figure 4
Position the grips in the most comfortable operation
position. Usually perpendicular to battery grip.
Position the double grips parallel to the battery grip if
you are balancing your gimbal in an inverted position.