User Manual

The roll balance is adjusted in two different ways.

First: Roughly balance the roll axis by choosing the

appropriate slot on the camera plate. Heavy cameras

should be placed closer to the pitch motor, while

lighter cameras should use the furthest slot from the

pitch motor.

Second: Fine tune the roll balance by loosening the

knob under the roll motor and sliding the bar left or

right. Slide the bar to a position where the roll axis

maintains a level horizon. If the roll bar is maxed

out to one side, then change the slot position on the

camera plate. Tighten the knob after the appropriate

balance is achieved.

#7 GLIDECAM CENTURION ROLL BALANCE

Figure 17