User Manual

Place the camera on camera tray and attach with
¼’’ screw. Pick appropriate slot that will accept your
cameras size and weight. If your camera doesn’t t
properly, move the camera to a different slot.
Adjust the fore and aft camera position, so that the
camera sits level with the lens pointing straight out.
Adjust the vertical bar by pointing the camera lens
either straight up or down. Loosen the knob to slide
the bar up and down until the camera is no longer top
or bottom heavy.
The camera should hold its position when pointed at
any given angle.
Tighten the knob securely after the appropriate
balance is achieved. (See Figure 13)
11
Figure 14
Figure 15
Figure 16