User Manual

Your camera setup must be properly balanced for all 3 axis to achieve the best performance from

the gimbal. Accurate balance is especially critical for shots where extreme angles or movements

are performed, such as car shots, running, biking, aerials, etc. Without properly following the

balance instructions, your gimbal may not perform at all, or with poor accuracy, and with decreased

battery performance. When changing cameras or lenses, make sure all three axis remain properly

balanced. Improper balance can ruin the motors and void warranty, so please follow all instructions

in order.

#6 GLIDECAM CENTURION TILT BALANCE

Balance your Glidecam CENTURION on the

BALANCE STAND.

**NOTE**: The Glidecam CENTURION BALANCE STAND is

sold separately.

Balance the camera with the Pitch motor on the left

hand side when looking at the gimbal from the front.

Figure 11

Figure 12

This can easily be moved up and down with the pitch

motor screw.

Figure 13

**NOTE**: Alternatively

if you do not have the

Glidecam CENTURION

BALANCE STAND,

you can setup the

Glidecam CENTURION

by placing it upside on

the table.