User's Manual

ASSEMBLY
For more informaon please visit our website: www.glidegear.net
1
The TMP 750 must be mounted on a tripod.
Remove the cheese plate from the tripod head
and screw it onto one of the 2 mounng holes
at the boom of the Tripod Plate.
2
Slide the Long Rails through
the Tripod Plate.
If necessary, use the supplied
Short Rails to increase the
length of the rails.
Lock the rail in place using the
Tripod Plate’s thumb screws.
3
Slide the Tablet Clamp onto the Long
Rails.
Make sure the Tripod Plate’s Clamp and
the Tablet Clamp are facing each other.
4
Slide the Camera Plate onto the rails on the opposite side
of the Beam Splier.
15mm Rail (Short)
15mm Rail (Long)
Camera Plate