SDS

PF8010 GLIDDEN PORCH & FLOOR GLOSS POLYURETHANE OIL PAINT WHITE
Product name
10.05
Product code
Date of issue
Version
00409642
10 January 2020
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
Do not store above the following temperature: 50°C (122°F). Store in accordance with
local regulations. Store in a segregated and approved area. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area, away from
incompatible materials (see Section 10) and food and drink. Eliminate all ignition
sources. Separate from oxidizing materials. Keep container tightly closed and sealed
until ready for use. Containers that have been opened must be carefully resealed and
kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination.
:
:
Special precautions
:
Vapors may accumulate in low or confined areas or travel a considerable distance to a
source of ignition and flash back. Vapors are heavier than air and may spread along
floors. Materials such as cleaning rags, paper wipes and protective clothing, which are
contaminated with the product may spontaneously self-ignite some hours later. To avoid
the risks of fires, all contaminated materials should be stored in purpose-built containers
or in metal containers with tight-fitting, self-closing lids. Contaminated materials should
be removed from the workplace at the end of each working day and be stored outside.
If this material is part of a multiple component system, read the Safety Data Sheet(s) for
the other component or components before blending as the resulting mixture may have
the hazards of all of its parts.
titanium dioxide
OSHA PEL (United States, 5/2018).
TWA: 15 mg/m³ 8 hours. Form: Total dust
ACGIH TLV (United States, 3/2019).
TWA: 10 mg/m³ 8 hours.
Solvent naphtha (petroleum), medium aliph.
ACGIH TLV (United States).
TWA: 400 ppm
OSHA PEL (United States, 5/2018).
TWA: 100 ppm 8 hours.
TWA: 400 mg/m³ 8 hours.
Naphtha (petroleum), hydrotreated heavy
None.
2-butanone oxime
IPEL (PPG).
TWA: 3 ppm
STEL: 9 ppm
2-ethylhexanoic acid, zirconium salt
ACGIH TLV (United States, 3/2019).
STEL: 10 mg/m³, (as Zr) 15 minutes.
TWA: 5 mg/m³, (as Zr) 8 hours.
OSHA PEL (United States, 5/2018).
TWA: 5 mg/m³, (as Zr) 8 hours.
ethylbenzene
ACGIH TLV (United States, 3/2019).
TWA: 20 ppm 8 hours.
OSHA PEL (United States, 5/2018).
Section 8. Exposure controls/personal protection
Ingredient name
Exposure limits
Control parameters
Occupational exposure limits
United States
Page: 6/15