SDS

GL PREM EXT LTX SG BS 3 GL6813
Product name
4
Product code
Date of issue
Version
00409277
1 July 2015
3-iodo-2-propynyl butylcarbamate
None.
Section 8. Exposure controls/personal protection
Ingredient name
Exposure limits
Hand protection
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Eye/face protection
:
:
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
:
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:
Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Hygiene measures
:
Control parameters
Individual protection measures
Occupational exposure limits
Skin protection
Other skin protection
:
Recommended monitoring
procedures
:
If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness of
the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to appropriate monitoring standards.
Reference to national guidance documents for methods for the determination of
hazardous substances will also be required.
Safety glasses with side shields.
Gloves
polyethylene
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Key to abbreviations
A
Acceptable Maximum Peak
=
ACGIH
=
American Conference of Governmental Industrial Hygienists.
C
=
Ceiling Limit
Potential skin absorption
S
SR
=
Respiratory sensitization
=
Skin sensitization
SS
TD
=
Total dust
Consult local authorities for acceptable exposure limits.
=
Threshold Limit Value
TLV
TWA
=
Time Weighted Average
Fume
=
F
IPEL
=
Internal Permissible Exposure Limit
=
Occupational Safety and Health Administration.
OSHA
R
=
Respirable
OSHA 29CFR 1910.1200 Subpart Z - Toxic and Hazardous Substances
=
Z
STEL
=
=
Short term Exposure limit values
United States
Page: 5/11