SAFETY DATA SHEET Date of issue/Date of revision 19 May 2015 Version 4 Section 1. Identification Product name : GL PREM INT LTX FLA BS 3 GLN9013 Product code : 00409439 Other means of identification : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Product use : Industrial applications, Used by spraying. Use of the substance/ mixture Uses advised against : Coating.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 2. Hazards identification Prevention Response : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. : IF exposed or concerned: Get medical attention. Storage : Store locked up.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 4. First aid measures Potential acute health effects Eye contact : No known significant effects or critical hazards. Inhalation Skin contact : No known significant effects or critical hazards. : No known significant effects or critical hazards. Ingestion : No known significant effects or critical hazards. Over-exposure signs/symptoms Eye contact : No specific data.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 6. Accidental release measures Personal precautions, protective equipment and emergency procedures For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 7. Handling and storage Conditions for safe storage, including any incompatibilities : Do not store below the following temperature: 5°C (41°F). Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 8. Exposure controls/personal protection Environmental exposure controls : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 9. Physical and chemical properties Evaporation rate : 0.05 (butyl acetate = 1) Vapor pressure : 3.3 kPa (25 mm Hg) [room temperature] Vapor density Relative density : Not available. : 1.2 Density ( lbs / gal ) : 10.01 Solubility : Partially soluble in the following materials: cold water. Partition coefficient: noctanol/water : Not available.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 11. Toxicological information Mutagenicity Conclusion/Summary : There are no data available on the mixture itself. Carcinogenicity Conclusion/Summary Classification : There are no data available on the mixture itself. Product/ingredient name OSHA IARC NTP Diatomaceous earth crystalline silica, respirable powder (<10 microns) - 3 1 Known to be a human carcinogen.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 11. Toxicological information Conclusion/Summary : There are no data available on the mixture itself. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. If splashed in the eyes, the liquid may cause irritation and reversible damage.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 15. Regulatory information United States inventory (TSCA 8b) : All components are listed or exempted. Australia inventory (AICS) : At least one component is not listed. Canada inventory ( DSL ) China inventory (IECSC) : At least one component is not listed in DSL but all such components are listed in NDSL. : Not determined.
Product code 00409439 Date of issue 19 May 2015 Version 4 Product name GL PREM INT LTX FLA BS 3 GLN9013 Section 16. Other information Date of previous issue : 1/10/2015.
