Use and Care Manual

ManualsBrandsGlidden Premium Ceiling ManualsCeiling Paint1 gal. Bright White Interior Flat EZ Track Ceiling Paint

DESCRIPTION

COMPOSITION

FEATURES

SPECIFICATION DATA

GLIDDEN

™

EZ Track

Ceiling Paint

formulated to be pink in the container and

when applied to make it easy to see where

you’ve painted, particularly in white-on-white

and low light applications. After approximately

½ hour, the paint dries bright white. This

special ceiling formulation provides minimal

spatter and excellent coverage, hides minor

surface imperfections and dries quickly to a

smooth, even finish.

Easy tracking to see where you've

painted

Great for white-on-white or low light

applications

Good hide

Uniform flat finish

Quick drying and recoat

Low odor and VOC

Soap & water clean-up

Vinyl-Acrylic Resin

Titanium Dioxide and Extender Pigments

Not manufactured with lead or mercury

containing materials.

Color:

Pink when wet

White when dry

Finish: Flat

Sheen - 5-10 units @ 85º

Clean-up Solvent:

Soap & water

Density:

10.88 lbs/gal (1.30 kg/L)

VOC:

50 g/L (0.42 lbs/gal) maximum

Solids:

Volume - 25% +/- 1%

Weight - 43% +/- 1%

Practical Coverage:

Apply at 200-300 sq ft/gal (5-7 m

/L).

Actual coverage may vary depending

on substrate and application method.

Recommended Film Thickness:

5.3 - 8.0 mils wet

1.3 - 2.0 mils dry

Flash Point:

None

Dry Time: 77°F (25°C) & 50% RH

To touch - 30-60 minutes

To recoat - 2-4 hours

Shelf Life:

1 year minimum - unopened

Interior Latex

Flat Ceiling Paint with

EZ Track

Technology

GCN3070

Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page. DSF1-0690

Summary of content (2 pages)

PAGE 1
Interior Latex Flat Ceiling Paint with EZ Track® Technology GCN3070 DESCRIPTION ™ SPECIFICATION DATA ® GLIDDEN EZ Track Ceiling Paint is formulated to be pink in the container and when applied to make it easy to see where you’ve painted, particularly in white-on-white and low light applications. After approximately ½ hour, the paint dries bright white.
PAGE 2
SURFACE PREPARATION PREPARING SURFACES FOR A PROFESSIONAL FINISH Clean and dry all surfaces to remove any dirt, dust, grease, wax, loose or peeling paint • Dull glossy surfaces by sanding or using a surface conditioner • Patch all cracks and holes with a patching compound; sand and prime before painting • Prime unpainted wood, metal, drywall or plaster with the appropriate primer. WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC.