SDS

GMF2017 GLIDDEN MAX-FLEX EXTERIOR FABRIC PAINT AND PRIMER SATIN
ELEMENTAL
Product name
1
Product code
Date of issue
Version
00447061
8 December 2021
Section 8. Exposure controls/personal protection
TWA: 590 mg/m³ 8 hours.
TWA: 200 ppm 8 hours.
2-methoxy-1-methylethyl acetate
IPEL (-, 10/2017). Absorbed through skin.
TWA: 30 ppm
STEL: 90 ppm
ethylbenzene
ACGIH TLV (United States, 1/2021).
TWA: 20 ppm 8 hours.
OSHA PEL (United States, 5/2018).
TWA: 435 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.
bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate
None.
maleic anhydride
ACGIH TLV (United States, 1/2021). Skin
sensitizer. Inhalation sensitizer.
TWA: 0.01 mg/m³ 8 hours. Form: Inhalable
fraction and vapor
OSHA PEL (United States, 5/2018).
TWA: 1 mg/m³ 8 hours.
TWA: 0.25 ppm 8 hours.
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or
other engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits. The engineering controls also need to keep gas,
vapor or dust concentrations below any lower explosive limits. Use explosion-proof
ventilation equipment.
Individual protection measures
Recommended monitoring
procedures
:
If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness of
the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to appropriate monitoring standards.
Reference to national guidance documents for methods for the determination of
hazardous substances will also be required.
Key to abbreviations
A
Acceptable Maximum Peak
=
ACGIH
=
American Conference of Governmental Industrial Hygienists.
C
=
Ceiling Limit
Potential skin absorption
S
SR
=
Respiratory sensitization
=
Skin sensitization
SS
TD
=
Total dust
Consult local authorities for acceptable exposure limits.
=
Threshold Limit Value
TLV
TWA
=
Time Weighted Average
Fume
=
F
IPEL
=
Internal Permissible Exposure Limit
=
Occupational Safety and Health Administration.
OSHA
R
=
Respirable
OSHA 29 CFR 1910.1200 Subpart Z - Toxic and Hazardous Substances
=
Z
STEL
=
=
Short term Exposure limit values
United States
Page: 8/19