SAFETY DATA SHEET Date of issue/Date of revision 18 November 2021 Version 2 Section 1. Identification Product name Product code : GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR : 00447078 Other means of identification : Not available. Product type : Aerosol. Relevant identified uses of the substance or mixture and uses advised against Product use : Consumer applications, Professional applications, Used by spraying.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 2. Hazards identification Hazard pictograms : Signal word : Danger Hazard statements : Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 3. Composition/information on ingredients Ingredient name % CAS number acetone toluene propane butane isobutyl acetate butanone Aluminium powder (stabilized) 2-methoxy-1-methylethyl acetate 2-(propyloxy)ethanol ≥20 - ≤50 ≥20 - ≤50 ≥10 - ≤20 ≥10 - ≤20 ≥10 - <20 ≥1.0 - ≤5.0 ≥1.0 - ≤5.0 ≥1.0 - ≤5.0 ≥1.0 - ≤5.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 4.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 5. Fire-fighting measures Specific hazards arising from the chemical Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : Extremely flammable aerosol.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 6. Accidental release measures Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 8. Exposure controls/personal protection Ingredient name Exposure limits acetone ACGIH TLV (United States, 1/2021). STEL: 500 ppm 15 minutes. TWA: 250 ppm 8 hours. OSHA PEL (United States, 5/2018). TWA: 2400 mg/m³ 8 hours. TWA: 1000 ppm 8 hours. OSHA PEL Z2 (United States, 2/2013). AMP: 500 ppm 10 minutes.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 8. Exposure controls/personal protection A ACGIH C F IPEL OSHA R Z = = = = = = = = Key to abbreviations Acceptable Maximum Peak American Conference of Governmental Industrial Hygienists. Ceiling Limit Fume Internal Permissible Exposure Limit Occupational Safety and Health Administration. Respirable OSHA 29 CFR 1910.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 8. Exposure controls/personal protection Body protection Other skin protection Respiratory protection : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 9. Physical and chemical properties Type of aerosol : Spray Heat of combustion : 32.44 kJ/g Section 10. Stability and reactivity Reactivity : No specific test data related to reactivity available for this product or its ingredients. Chemical stability : The product is stable.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 11. Toxicological information Conclusion/Summary Skin Eyes Respiratory Sensitization Conclusion/Summary Skin Respiratory : There are no data available on the mixture itself. : There are no data available on the mixture itself. : There are no data available on the mixture itself.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 11. Toxicological information Target organs : Contains material which causes damage to the following organs: brain, central nervous system (CNS), eye, lens or cornea.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 11. Toxicological information Conclusion/Summary : There are no data available on the mixture itself.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 12. Ecological information Toxicity Product/ingredient name Result Species Exposure acetone Acute LC50 4.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 15. Regulatory information United States United States inventory (TSCA 8b) : All components are active or exempted. SARA 302/304 SARA 304 RQ : Not applicable. Composition/information on ingredients No products were found.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 15. Regulatory information 2-methoxy-1-methylethyl acetate ≥1.0 - ≤5.0 2-(propyloxy)ethanol ≥1.0 - ≤5.
Product code 00447078 Date of issue 18 November 2021 Version 2 Product name GMF1025 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND PRIMER SATIN SHINING ARMOR Section 16. Other information N/A = Not available SGG = Segregation Group UN = United Nations Indicates information that has changed from previously issued version. Disclaimer The information contained in this data sheet is based on present scientific and technical knowledge.
