SDS

GMF1011 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND
PRIMER MATTE BLACK
Product name
2
Product code
Date of issue
Version
00447065
18 November 2021
Section 8. Exposure controls/personal protection
Respiratory protection
:
Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected respirator. If workers
are exposed to concentrations above the exposure limit, they must use appropriate,
certified respirators. Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is necessary.
The respiratory protection shall be in accordance to 29 CFR 1910.134.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
0.75
Not available.
Not available.
Insoluble in the following materials: cold water.
Characteristic.
Odor
pH
Black.
Color
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Closed cup: -94°C (-137.2°F)
Not applicable.
Not applicable.
Viscosity
Kinematic (40°C (104°F)): >21 mm
2
/s (>21 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
<35°C (<95°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
Type of aerosol
:
Spray
Heat of combustion
:
31.32 kJ/g
Aerosol product
% Solid. (w/w)
:
8.415
Density ( lbs / gal )
:
6.26
Volatility
:
95% (v/v), 91.585% (w/w)
Aerosol.
United States
Page: 9/18