SDS

GMF1011 GLIDDEN MAX-FLEX ALL SURFACE INTERIOR/EXTERIOR PAINT AND
PRIMER MATTE BLACK
Product name
2
Product code
Date of issue
Version
00447065
18 November 2021
Section 15. Regulatory information
SARA 313
SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include
copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.
Additional environmental information is contained on the Environmental Data Sheet for this product, which
can be obtained from your PPG representative.
California Prop. 65
Supplier notification
Chemical name
:
toluene
108-88-3
10 - 30
4-methylpentan-2-one
108-10-1
1 - 5
CAS number
Concentration
4-methylpentan-2-one
≥1.0 - ≤5.0
FLAMMABLE LIQUIDS - Category 2
ACUTE TOXICITY (inhalation) - Category 4
EYE IRRITATION - Category 2A
CARCINOGENICITY - Category 2
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE)
(Respiratory tract irritation) - Category 3
HNOC - Defatting irritant
ethyl 3-ethoxypropionate
≥1.0 - ≤5.0
FLAMMABLE LIQUIDS - Category 3
HNOC - Defatting irritant
HNOC - May form explosive peroxides.
butanone
≥1.0 - ≤5.0
FLAMMABLE LIQUIDS - Category 2
EYE IRRITATION - Category 2A
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE)
(Narcotic effects) - Category 3
HNOC - Defatting irritant
carbon black
≤1.0
COMBUSTIBLE DUSTS
CARCINOGENICITY - Category 2
maleic anhydride
<0.10
COMBUSTIBLE DUSTS
ACUTE TOXICITY (oral) - Category 4
SKIN CORROSION - Category 1B
SERIOUS EYE DAMAGE - Category 1
RESPIRATORY SENSITIZATION - Category 1A
SKIN SENSITIZATION - Category 1A
SPECIFIC TARGET ORGAN TOXICITY (REPEATED
EXPOSURE) - Category 1
WARNING
: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Section 16. Other information
Hazardous Material Information System (U.S.A.)
4
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or
risks. Although HMIS® ratings and the associated label are not required on MSDSs or products leaving a facility under 29 CFR 1910.1200, the
preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark
and service mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS®
Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.
:
:
:
2
*
0
( * ) - Chronic effects
United States
Page: 17/18