SDS

GLE3012 GLIDDEN ESSENTIALS INTERIOR LATEX SEMI-GLOSS - BASE 2
Product name
1
Product code
Date of issue
Version
00380325
16 December 2015
Section 15. Regulatory information
SARA 302/304
SARA 304 RQ
:
72098.1 lbs / 32732.5 kg [8006.5 gal / 30307.9 L]
Composition/information on ingredients
Name
EHS
(lbs)
(lbs)
(gallons)
(gallons)
SARA 302 TPQ
SARA 304 RQ
SARA 311/312
Classification
:
Delayed (chronic) health hazard
titanium dioxide
No.
No.
No.
No.
Yes.
-
Name
Fire
hazard
Sudden
release of
pressure
Reactive
Immediate
(acute)
health
hazard
Delayed
(chronic)
health
hazard
Composition/information on ingredients
All components are listed or exempted.
United States inventory (TSCA 8b)
:
United States
Additional environmental information is contained on the Environmental Data Sheet for this product, which
can be obtained from your PPG representative.
ammonia, anhydrous
Yes.
500
-
100
-
-
Section 16. Other information
Key to abbreviations
:
ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
Hazardous Material Information System (U.S.A.)
0
0
0
National Fire Protection Association (U.S.A.)
Health
Instability
Flammability
Health
Flammability
Physical hazards
Date of previous issue
No previous validation
:
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or
risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are
to be used with a fully implemented HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS®
materials may be purchased exclusively from J. J. Keller [phone].
The customer is responsible for determining the PPE code for this material.
Organization that prepared
the MSDS
:
EHS
:
:
:
:
:
:
1
*
1
0
( * ) - Chronic effects
United States
Page: 11/12