Manual

Page 7 of 24
OVERVIEW
The Glensound MMinFerno is a single user commentary box designed to connect to a
Dante® audio network. The MMinFerno provides all the talkback and monitoring
circuits required by a commentator whilst incorporating a very high quality
microphone amplifier and compressor limiter circuit designed specifically for the
requirements of commentators equipment.
The audio inputs and outputs of the MinFerno are Dante® network audio circuits.
Dante® network audio is a common protocol for distributing high quality linear audio
over standard IP networks and it is widely used by many audio equipment
manufacturers. The Glensound MinFerno’s Dante® audio interface will be compatible
with any other manufacturers Dante® audio interface. Further details of Dante®
network audio can be found at www.audinate.com
Being designed for live on-air broadcast applications the Glensound MinFerno has
been designed with multiple redundancy capabilities. It has 3 possible sources of
power (2 x PoE & 1 external DC) and it also has fully redundant network connections for
both Copper & Fibre circuits.