Manual

Page 23 of 24
UPDATING THE BROOKLYN MODULE
The Brooklyn module is a device supplied by Audinate that does most of the
processing for the actual Dante®/ AES67 network audio streams. There is one
Brooklyn module in each MinFerno. We supply special code (a .dnt file) that sets up/
initiates the Brooklyn module and makes it work in particular way and we also run
extra code on its internal microprocessor to make it work correctly with the MinFerno.
1. Finding Out What The Latest Available Version Is
Go the MinFerno’s web page at http://www.glensound.co.uk/product-
details/MinFerno/ and open the ‘Firmware Update’ Tab.
This will give both the latest version numbers/ file names and also the location to
download the file from.
2. Updating the Brooklyn Module
The firmware that runs on the Brooklyn module is updated using Audinate’s
Firmware updating tool. The updating tool and a user guide can be downloaded from
Audinate’s website:
https://www.audinate.com/products/firmware-update-manager
The actual firmware to install using the above tool can curently be downloaded from:
http://www.glensound.co.uk/Software/Dante®/MinFerno_v4.1.0.dnt
When downloading the above file please make sure that you know where your
computer has saved it.
Please note we strongly advise that when you do the update that only your PC and
the Paradiso that you want to update are on the network to save accidently updating
the wrong Dante® device.