Manual

Page 13 of 24
WEB PAGE FOR SETTINGS
1. General
The MinFerno has a built in web server to allow an operator to control the unit
remotely and to change the units settings. To access the web page a web browser
running on a computer on the same network as the MinFerno is connected to just
needs to connect using the unit’s web page IP address or its DNS name.
2. DNS Name
The DNS (Domain Name System) name allows a name to be inserted in a web
browser rather than an ip address for navigation to the MinFernos web page. Each
MinFerno has 2 names associated with it.
a. Factory default DNS name:
This is set as ‘MinFerno000xxx’ where xxx is the units serial no (printed on the rear
panel). This factory default DNS name cannot be changed and is useful for
accessing the MinFernos web page for settings if the IP address or custom DNS
name is not known.
b. Custom DNS name:
Via the web page it is possible to set a specific custom DNS name that will be easy
for you to remember and help identify multiple MinFernos on your network.
As per the screenshot below to access the MinFernos web page the factory default
DNS name can be inserted in a web browsers address bar followed by a forward
slash ‘/’. If you are using a web browser with auto search facility then add http:// to
the start of the MinFernos address to stop the browser from auto searching the net.