Users Guide & Installation Handbook Belling Built-In Electric with Microwave Oven Part No 082757900 Date 10.10.
CONTENTS & INTRODUCTION CONTENTS • SAFETY • USING THE PRODUCT • CLEANING • INSTALLATION INSTRUCTIONS • TECHNICAL DATA • CUSTOMER CARE INTRODUCTION Thank you for buying this Britishbuilt appliance from us. This guide book is designed to help you through each step of owning your new cooker, from installation to use. Please read it carefully before you start using your product, as we have endeavored to answer as many questions as possible, and provide you with as much support as we can.
SAFETY BEFORE USING THE PRODUCT Make sure that you have removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. Caution: This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. • • Always use oven gloves when handling any utensils that have been in the oven as they will be hot. Always make sure that the oven shelves are resting in the correct position between two runners.
SAFETY MICROWAVE OVEN Warning : If the door or door seals are damaged, the oven must not be operated until it has been repaired by a competent person. Warning : It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to microwave energy. Warning : Liquids and other foods must not be heated in sealed containers since they are liable to explode.
USING THE (800W) MICROWAVE OVEN The Display Screen The display screen shows the cooking time, power and program information. When the microwave is in standby mode, a green clock symbol will be visible. No time will be displayed. Function Controls Power Level Combi 1 Weight Adjust Grill Combi 2 Weight Defrost Pause/ Cancel Preset Start/ Quick Start Menu Time Cooking Menu 1. 2. 3. 4. Milk/Coffee Rice/Pasta Spaghetti Potato 5. Auto Reheat 6. Fish 7. Chicken 8. Beef/Lamb 9.
USING THE (800W) MICROWAVE OVEN Cooking with the microwave oven gratin dishes. For microwave cooking, press the POWER LEVEL button several times to select a cooking power level, and then use the MENU/TIME dial to set a desired cooking time. The longest cooking time is 95 minutes. Press the Combi button until CO-1 is displayed, turn the Menu/Time dial to the required cooking time and press the Start/ Quick Start button.
USING THE (800W) MICROWAVE OVEN Code Food Type 01 Milk/Coffee (200ml/cup) 02 Rice/Pasta (g) 03 Spaghetti (g) 04 Potato (each 230g) 05 Auto Reheat (g) 06 Fish (g) 07 Chicken (g) 08 Beef/Lamb (g) 09 Skewered Meat (g) When you press the Weight Adjust button, the display will show the number of servings instead of food weight for milk/coffee and potatoes.
USING THE GRILL - ELECTRIC Caution: Accessible parts may be hot when the grill is used - young children should be kept away. Detachable grill pan handle 5 minutes. Push the grill pan towards the back of the shelf, to position it under the grill. The speed of grilling can be controlled by selecting a higher or lower shelf position. For toasting, and for grilling foods such as bacon, sausages or steaks, use a higher shelf position.
USING THE MAIN OVEN - ELECTRIC Accessible parts may be hot when the oven is used. Young children should be kept away. To switch on the oven Turn the oven control knob(s) to the required setting. The red thermostat indicator (if fitted) will come on until the selected temperature is reached and then go off; it will turn on and off periodically as the thermostat operates to maintain the selected temperature. To switch off, return the control knob to the “off” position.
USING THE MAIN OVEN - ELECTRIC Slow cooking ( Setting or 100°C) • Make sure that frozen foods are thoroughly thawed before cooking. • Do not slow cook joints of meat or poultry weighing more than 2¼kg/4½lb. • Preheat the oven to 170°C and cook for 30 minutes, then adjust the oven control to or 100°C (slow cook setting) for the remainder of the cooking time. • Slow cooking times will be about 3 times as long as conventional cooking times.
USING THE MAIN OVEN - ELECTRIC There is no need to interchange dishes onto different shelves part way through cooking, as with a conventional oven. To help the air circulate freely Position the shelves evenly within the oven and maintain a clearance from the oven roof and base. If more than one cooking dish or baking tray is to be used on a shelf, leave a gap of at least 25mm between the items themselves and the oven interior.
USING THE MAIN OVEN - ELECTRIC Note: this is a high efficiency oven, therefore some adjustment will have to be made to conventional cooking temperatures. The table below shows conventional cooking temperatures, ‘A’ efficiency temperatures and gas marks. For optimum results, conventional temperatures need to be converted to ‘A’ efficiency temperatures. For example, an item which would normally cook at a conventional temperature of 180 °C, will now cook at the ‘A’ efficiency temperature of 160°C.
USING THE MAIN OVEN - ELECTRIC Traditional fruit cakes Roast turkey It should be remembered that ovens can vary over time, therefore cooking times can vary, making it difficult to be precise when baking fruit cakes. Roasting turkey involves cooking two different types of meat - the delicate light breast meat, which must not be allowed to dry out, and the darker leg meat, which takes longer to cook. It is necessary therefore, to test the cake before removal from the oven.
USING THE MAIN OVEN - ELECTRIC Roasting guide Notes: The times given in the roasting guide are only approximate, because the size and age of the bird will influence cooking times as will the shape of a joint and the proportion of the bone. • When cooking stuffed meat or poultry calculate the cooking time from the total weight of the meat plus the stuffing. • For joints cooked in foil or covered roasters, and for lidded casseroles, add 5 minutes per 450g (1lb) to the calculated cooking time.
USING THE CLOCK/PROGRAMMER - ELECTRIC THE ALTERNATIVE PROGRAMMERS There are two types of programmer covered in this section - push button & touch control. Both programmers have the same symbol variants & functions but may vary in their method of operation. The push button programmer Symbol Symbol - Symbols on the LED display. Down/minus This ‘A’ symbol appears when either a semi, or fully automatic program is selected. This symbol will flash while a program is being set.
USING THE CLOCK/PROGRAMMER - ELECTRIC you are asked to enter in an end time, or when you would like the oven to switch itself off. Setting the minute minder To set the time of day • Press the Up and Down buttons together for a few seconds, and release. • The ‘ •’ in between the numbers on the LED Display will begin to flash. • While the ‘ •’ is flashing it is possible to adjust the time using the Up and Down buttons.
USING THE CLOCK/PROGRAMMER - ELECTRIC Semi-automatic cooking There are two types of semi automatic cooking available on this appliance. The oven must be switched on, and in use to use either of these functions successfully. The Duration method allows you to set the oven for a specific length of time. If a dish needed 2 hours to cook, then it would be possible for you to set the oven to turn off 2 hours later. This allows you to be sure that your food will be cooked for a set length of time and no longer.
USING THE CLOCK/PROGRAMMER - ELECTRIC SEMI-AUTOMATIC COOKING The duration method • Press the Function button twice,(1) which will skip past the Minute Minder. • The LED display will flash the word ‘dur’, (2) and the ‘A’ will flash on the left hand side of the display. • Use the Up and Down buttons to set the length of time you want to cook for.(3) This must be done within 5 seconds or the time of day will show again.
USING THE CLOCK/PROGRAMMER - ELECTRIC FULLY AUTOMATIC COOKING (EXAMPLE) This programming method is best suited for when a delayed start time is required. Unlike the semi automatic methods this requires both the duration and the end time to be entered. The timer will work out the start time and begin cooking. • Press the function button twice to select the length of time your food will need. (7) • The ‘A’ on the left hand side will flash and the ‘dur’ message will flash up.
USING THE CLOCK/PROGRAMMER - ELECTRIC The touch control programmer There are three touch control icons for this timer - the table below shows you what the symbols look like, depending on the model type, & their functions. The ‘function’ icon in the centre is used for setting the minute minder & setting up the automatic cooking - see below for details. Note - some functions require you to ‘touch & hold’ an icon for a few seconds, whilst others require you to just ‘touch’ the icon without holding.
USING THE CLOCK/PROGRAMMER - ELECTRIC Setting the time of day Semi-automatic cooking Touch & hold the centre (function) icon for a few seconds until the ● symbol between the numbers on the LED display flashes. Method 1 - duration (switch of after set time period): While the ● symbol is flashing, you can adjust the time of day by touching the plus & minus icons. Please note: the hours & minutes adjust quickly.
USING THE CLOCK/PROGRAMMER - ELECTRIC Use the plus & minus icons to select the time the oven is required to switch off. Once this is done the oven will switch itself off at the pre-selected time. To turn the alarm off, touch any icon. To cancel the semi-automatic programme at any time, touch the plus & minus icons together. Fully automatic cooking This function allows the cooker to switch on & off automatically. It requires both the duration & the end time to be entered.
CLEANING General • It is important to clean the product regularly as a build up of fat can affect its performance or damage it and may invalidate your guarantee. • Always switch off your appliance and allow it to cool down before you clean any part of it. • Do not use undiluted bleaches, products containing chlorides, wire wool or abrasive cleaners on aluminium, stainless steel, or plastic/ painted parts as they can damage the appliance. Nylon pads can also be unsuitable.
CLEANING REMOVING OVEN PARTS FOR CLEANING Inner Door Glass • The inner door glass panel can be removed for cleaning but it must be replaced the right way up. If there is any writing on the glass, you must be able to read it clearly when the cavity doors are open. • Always make sure that the glass is pushed fully into the Stop position. • To remove the glass panel, open the door wide, hold the top and bottom edges and slide out.
CLEANING MICROWAVE OVEN • • Always keep the inside of the oven clean. Wipe any food and liquid spillages with a damp cloth. Mild detergent may be used if the oven gets very dirty. Avoid the use of spray and other harsh cleaners as they may stain, streak or dull the door surface. The outside surfaces should be cleaned with a damp cloth. To prevent damage to the operating parts inside the oven, water should not be allowed to seep into the ventilation openings.
INSTALLATION STEP 1 : PREPARE INSTALLATION Do not lift the appliance by the door handle. Whilst every care is taken to eliminate burrs and raw edges from this product,please take care when handling - we recommend the use of protective gloves during installation. Please note that the weight of this appliance is approximately 31kg (unpacked). Take care when lifting it into the housing unit - always use an appropriate method of lifting.
INSTALLATION - 60CM i) When installed in a typical 600mm deep built in housing unit, the false back should be removed from the housing unit to provide the necessary depth for installation. ii) When the false back is removed, it is normally the case that the support shelf for the appliance leaves a gap between the back edge and the wall of approximately 80mm.
INSTALLATION - 70CM Before you start Please read the instructions carefully planning your installation will save you time and effort. Look at the different ways the appliance can be installed - as shown on the following pages - and plan the installation to suit your situation. Leave the appliance in the base tray packaging until you are ready to install it. When you remove the appliance from the base tray packaging, take care not to damage it.
INSTALLATION - 70CM METHOD 1: WITHOUT HOUSING UNIT(BETWEEN 2 BASE UNITS) 2. Make sure they are the right way up as shown. Before installing the appliance, check the internal dimensions as shown. 3. Take one of the side trims, hold it against the side of the base unit, and mark off 687mm from the top edge of the base unit, to the top edge of the runner. The space for the appliance must be clear of obstruction. You may have to cut into or remove any rear cross members to obtain the 550mm minimum depth.
INSTALLATION - 70CM METHOD 2: HOUSING UNIT WITH INTERNAL HEIGHT LESS THAN 710MM Note: You will not need the 2 side trims (687mm long) or the appliance runners for this installation. You will need the 2 runners to fix to the adjacent cabinets. Before you start; Before removing the bottom shelf or modifying the housing unit, make sure that it will remain structurally sound, eg; by fixing to adjacent cabinets, floor or worktop.
INSTALLATION - 70CM Method 3: Housing unit with internal height 710mm or more Note: You will not need the 4 runners and 2 trims that are packed with the oven for this installation. 1. When installed in a typical 600mm deep built in housing unit, the false back should be removed from the housing unit to provide the necessary depth for installation. 2.
INSTALLATION - 90CM STEP 1 : PREPARE INSTALLATION Do not lift the appliance by the door handle. Remove the fixing screws from the polythene bag on the top of the appliance, but leave the appliance in the base tray packaging until you are ready to install it. Whilst every care is taken to eliminate burrs and raw edges from this appliance, please take care when handling - we recommend the use of protective gloves during installation.
INSTALLATION - 90CM Dimensions The appliance is designed to fit into a standard 600mm wide housing unit, with minimum internal dimensions as shown. Note: All sizes are nominal, some variation is to be expected.
INSTALLATION STEP 2 & 3 CONNECT TO THE ELECTRICITY SUPPLY We recommend that the appliance is connected by a competent person who is a member of a “Competent Person Scheme” & who will comply with the I.E.E. & local regulations. Important: Ensure that you route all mains electrical cables well clear of any adjacent heat source, such as an oven or grill. Warning: This appliance must be earthed. For 60cm BI appliance: 1.
INSTALLATION STEP 4: SECURE APPLIANCE INTO HOUSING UNIT Note : The unit housing the appliance must be appropriately fixed. Ensure that the appliance is centrally located. Take care not to damage the appliance or cabinetry. 70cm only Method 1 : Care must be taken to ensure the appliance runners are sufficiently engaged over the top of the runners on the base units. Method 2 : Insert appliance into the cabinet - ensure that it is engaged over the top of the side runners.
INSTALLATION Anti-stain trim (if fitted) The anti-stain trim is factory fitted to the edges of the appliance front frame. This trim provides the cabinetry with extra protection from any escape of heat. - When Installing the product, ensure the anti-stain trim is correctly located on the edges of the front frame, before positioning and securing the appliance to the cabinet. - When securing the appliance, the fixing screws provided are driven through the anti-stain trim into the cabinet.
TECHNICAL DATA ELECTRIC PRODUCTS Electrical supply/load 220 - 240V ~ 50Hz 2450MHZ 2770W-3300W Countries of destination GB - Great Britain, IE - Ireland, AU - Australia, NZ - New Zealand Warning: This appliance must be earthed. Databadge is located at the bottom of the front frame, behind the door.
CUSTOMER CARE FAQs What parts of the appliance can be washed in a dishwasher? • Any enamelled parts such as the grillpan can be cleaned in a dishwasher, as can oven shelves and shelf guides. duce condensation when the oven is cooling down with food inside.
CUSTOMER CARE CUSTOMER CARE WEB SHOP Having purchased a superior cooker, hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manufacturer? We offer an extensive range of accessories, components and cleaning products which, will instantly give your cooker a good as new look. range of Bake ware and Cookware essentials including Roasting Pans, Cake Tins and Non-Stick Cooking Liners. For all enquires, please visit our Web Shop at www.gdhaonline.
CUSTOMER CARE CHANGING LIGHT BULBS (where fitted) Warning: There is a risk of electric shock, so always make sure you have turned off and unplugged your appliance before starting. Always allow the product to cool down before you change a bulb. Not all appliances have the same number and type of bulbs. Before replacing your bulb, open the oven door and see which type you have. Then use the table to help you change your bulb correctly.
Please keep this handbook for future reference, or for anyone else who may use the appliance.
Please keep this handbook for future reference, or for anyone else who may use the appliance.
Please keep this handbook for future reference, or for anyone else who may use the appliance.
CUSTOMER CARE In case of difficulty within the UK, please call Belling Customer Care Helpline on 0844 815 3746 Alternatively general, spares and service information is available from our website at www.belling.co.uk Please ensure that you have the product’s model no and serial no available when you call.
