Datasheet

9-14 Cursor Auto Moving
Bit0 = 0： Disable.
Bit0 = 1： Enable.
The RA6963 provides a unique function for the automatic cursor movement. After writing (reading) each
displayed datum, the cursor pointer is automatically increased/decreased by one in the Cursor Auto-Moving
mode.
9-15 CGROM Font Select
This command (70h) is a convenient function for selecting the Character Font Map. The user can get
more built-in characters from CGROM Font-01 or CGROM Font-02, which is determined by
software selections. The selections are listed in the Table 6-30.