Datasheet

9-12 Screen Reverse
Bit0 = 0： Normally display.
Bit0 = 1： Reverse the whole screen.
This command (D0h) is used to reverse the displayed data of the whole screen. When this function is
enabled, the displayed data on the LCD are reversed to show reversing pattern.
9-13 Blink Time
The blink time of the blink functions are adjusted by this command (50h). For example, if the
frequency of the frame equals 60Hz, the blink time can be adjusted from 0.066 second to 2 second
by using software selections. The selections are listed in the Table 6-26.