Gleichmann & Co. Electronics GmbH Industriestrasse 16 76297 Stutensee-Spöck / Germany SPECIFICATION CUSTOMER : MODULE NO.: GE- G12864A-CFH-V/RN APPROVED BY: ( FOR CUSTOMER USE ONLY ) PCB VERSION: SALES BY APPROVED BY CHECKED BY DATA: PREPARED BY ISSUED DATE: VERSION DATE C 2009/06/16 GE-G12864A-CFH-V/RN REVISED SUMMARY PAGE NO. 11 page 1 / 23 Modify Timing Characteristics 15.06.
MODLE NO： DOC. FIRST ISSUE RECORDS OF REVISION REVISED SUMMARY PAGE NO. VERSION DATE 0 A B 2006.05.22 2006.07.11 2008/12/24 9 15 C 2009/06/16 11 GE-G12864A-CFH-V/RN page 2 / 23 First issue Modify the contour drawing Modify backlight information. Modify Timing Characteristics 15.06.
Contents 1.Module Classification Information 2.Precautions in use of LCD Modules 3.General Specification 4.Absolute Maximum Ratings 5.Electrical Characteristics 6.Optical Characteristics 7. Interface Description 8. Contour Drawing & Block Diagram 9. Timing Characteristics 10.Display control instruction 11. Detailed Explanation 12.Reliability 13.Backlight Information 14. Inspection specification 15. Material List of Components for RoHs GE-G12864A-CFH-V/RN page 3 / 23 15.06.
1. Module Classification Information GE-G 12864 A - C F H- V/RN Brand：Gleichmann Electronics Display Type：C→Character Type, G→Graphic Type Display Font：128 * 64 Model serials no.
2.Precautions in use of LCD Modules (1) Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2) Don’t make extra holes on the printed circuit board, modify its shape or change the components of LCD module. (3) Don’t disassemble the LCM. (4) Don’t operate it above the absolute maximum rating. (5) Don’t drop, bend or twist LCM. (6) Soldering:only to the I/O terminals. (7) Storage:please storage in anti-static electricity container and clean environment. 3.
4.Absolute Maximum Ratings Item Symbol Min Typ Max Unit Operating Temperature TOP -20 － +70 ℃ Storage Temperature TST -30 － +80 ℃ Input Voltage VI 0 － VDD V Supply Voltage For Logic VDD 0 － 6.7 V Supply Voltage For LCD VDD-VSS 0 － 16.7 V Supply Voltage For LCD VDD-VOUT － － -10 V 5.Electrical Characteristics Item Supply Voltage For Logic Symbol Condition Min Typ Max Unit VDD-VSS － 4.5 5.0 5.5 V Ta=-20℃ － － 10.6 V Ta=25℃ 8.8 8.95 9.
6.
7.Interface Description Pin No. Symbol Level Description 1 VSS 0V Ground 2 VDD 5.
8.Contour Drawing &Block Diagram 93.0 0.5 80.0 72.0(VA) 66.52(AA) 13.6 MAX 2.5 7.0 9.0 65.0 70.0 0.5 50.2 40.0(VA) 33.24(AA) 9.9 15.0 18.38 10.5 13.24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 22- 1.0 PTH 1.8 P2.54*21=53.34 88.0 8.92 2.5 1 4- 2.5 PTH 4- 6.5 PAD 2.5 22 1.6 LED B/L 0.52 0.48 0.52 0.
9.Timing Characteristics MPU Interface (T=25℃, VDD=+5.0V±0.
GE-G12864A-CFH-V/RN page 11 / 23 15.06.
10.Display Control Instruction The display control instructions control the internal state of the NT7108. Instruction is received from MPU to NT7108 for the display control. The following table shows various instructions. GE-G12864A-CFH-V/RN page 12 / 23 15.06.
11.Detailed Explanation The display data appears when D is 1 and disappears when D is 0. Though the data is not on the screen with D=0, it remains in the display data RAM. Therefore, you can make it appear by changing D=0 into D=1. SET ADDRESS (Y ADDRESS) Y address (AC0-AC5) of the display data RAM is set in the Y address counter. An address is set by instruction and increased by 1 automatically by read or write operations of display data.
‧BUSY When BUSY is 1, the Chip is executing internal operation and no instructions are accepted. When BUSY is 0, the Chip is ready to accept any instructions. ‧ON/OFF When ON/OFF is 1, the display is OFF. When ON/OFF is 0, the display is ON. ‧RESET When RESET is 1, the system is being initialized. In this condition, no instructions except status read can be accepted. When RESET is 0, initializing has finished and the system is in usual operation condition.
12. Reliability Content of Reliability Test (wide temperature, -20°C~70°C) Environmental Test Test Item Content of Test Test Condition Note High Temperature storage Endurance test applying the high storage temperature for a long time. 80℃ 200hrs 2 Low Temperature storage Endurance test applying the high storage temperature for a long time.
13.Backlight Information Specification PARAMETER SYMBOL MIN TYP MAX UNIT TEST CONDITION Supply Current ILED_RED － 60 － mA V=1.8V ~ 2.3V Supply Current ILED_GREEN － 60 － mA V=2.9V ~ 3.5V Supply Current ILED_BULE － 60 － mA V=2.9V ~ 3.5V Supply Voltage V_RED 1.8 1.9 2.3 V Supply Voltage V_GREEN 2.9 3.2 3.5 V Supply Voltage V_BULE 2.9 3.2 3.5 V Reverse Voltage VR Luminous 5 V － IV_RED － 2.8 － CD/M2 ILED=60mA IV_GREEN － 12.
1. TTL signal control 2. low active 3. drive transaction included GE-G12864A-CFH-V/RN page 17 / 23 15.06.
14. Inspection specification NO 01 02 Item Criterion AQL Electrical Testing 1.1 Missing vertical, horizontal segment, segment contrast defect. 1.2 Missing character , dot or icon. 1.3 Display malfunction. 1.4 No function or no display. 1.5 Current consumption exceeds product specifications. 1.6 LCD viewing angle defect. 1.7 Mixed product types. 1.8 Contrast defect. 0.65 Black or white 2.1 White and black spots on display ≦0.25mm, no more than spots on LCD three white or black spots present.
NO Item 05 Scratches Criterion AQL Follow NO.3 LCD black spots, white spots, contamination Symbols Define: x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length: 6.1 General glass chip : 6.1.1 Chip on panel surface and crack between panels: 06 Chipped glass z: Chip thickness y: Chip width x: Chip length Z≦1/2t Not over viewing area x≦1/8a 1/2t＜z≦2t Not exceed 1/3k x≦1/8a 2.
NO Item Criterion AQL Symbols : x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length 6.2 Protrusion over terminal : 6.2.1 Chip on electrode pad : y: Chip width x: Chip length z: Chip thickness y≦0.5mm x≦1/8a 0＜z≦t 6.2.2 Non-conductive portion: 06 Glass crack 2.
NO Item 07 Cracked glass 08 09 10 Backlight elements Bezel PCB、COB Criterion AQL The LCD with extensive crack is not acceptable. 2.5 8.1 Illumination source flickers when lit. 8.2 Spots or scratched that appear when lit must be judged. Using LCD spot, lines and contamination standards. 8.3 Backlight doesn’t light or colour wrong. 0.65 2.5 0.65 9.1 Bezel may not have rust, be deformed or have fingerprints, stains or other contamination. 9.2 Bezel must comply with job specifications. 2.5 0.
NO Item Criterion AQL 12.1 No oxidation, contamination, curves or, bends on interface Pin (OLB) of TCP. 12.2 No cracks on interface pin (OLB) of TCP. 12.3 No contamination, solder residue or solder balls on product. 12.4 The IC on the TCP may not be damaged, circuits. 12.5 The uppermost edge of the protective strip on the interface pin must be present or look as if it cause the interface pin to sever. 12 General appearance 12.
15. Material list of components for RoHS 1. The manufacturer hereby declares that all of or part of products (with the mark “/R” in code), including, but not limited to, the LCM, accessories or packages, manufactured and/or delivered to your company (including your subsidiaries and affiliated company) directly or indirectly by our company (including our subsidiaries or affiliated companies) do not intentionally contain any of the substances listed in EU-Directive 2002/95/EC.
