Datasheet

GE-C1602B-CFH-JT/R page 26/ 26 12.07.2011
17. Material list of components for RoHS
1. The manufacturer hereby declares that all of or part of products (with the mark
“/R” in code), including, but not limited to, the LCM, accessories or packages,
manufactured and/or delivered to your company (including your subsidiaries and
affiliated company) directly or indirectly by our company (including our
subsidiaries or affiliated companies) do not intentionally contain any of the
substances listed in EU-Directive 2002/95/EC.
Exhibit A: The harmful material list
Material (Cd) (Pb) (Hg) (Cr6+) PBBs PBDEs
Limited
Value
100
ppm
1000
ppm
1000
ppm
1000
ppm
1000
ppm
1000
ppm
Above limited value is set up according to RoHS.
2. Process for RoHS requirement:
(1) Use the Sn/Ag/Cu soldering surface；the surface of Pb-free solder is rougher than
used before.
(2) Heat-resistance temp.:
Reflow：250°C,30 seconds Max.;
Connector soldering wave or hand soldering：320°C, 10 seconds max.
(3) Temp. curve of reflow, max. Temp.：235±5°C;
Recommended customer’s soldering temp. of connector : 280°C, 3 seconds.