Gleichmann & Co. Electronics GmbH Industriestrasse 16 76297 Stutensee-Spöck / Germany SPECIFICATION CUSTOMER : MODULE NO.: GE-C1602B-CFH-JT/R APPROVED BY: ( FOR CUSTOMER USE ONLY ) PCB VERSION: SALES BY APPROVED BY CHECKED BY DATA: PREPARED BY ISSUED DATE: VERSION DATE 0 2007.06.28 GE-C1602B-CFH-JT/R REVISED SUMMARY PAGE NO. First issue page 1/ 26 12.07.
Contents 1. Module Classification Information 2. Precautions in use of LCD Modules 3. General Specification 4. Absolute Maximum Ratings 5. Electrical Characteristics 6. Optical Characteristics 7. Interface Pin Function 8. Contour Drawing & Block Diagram 9. Function Description 10. Character Generator ROM Pattern 11. Instruction Table 12. Timing Characteristics 13. Initializing of LCM 14. Reliability 15. Backlight Information 16. Inspection specification 17.
1. Module Classification Information GE-C 1602 B -C F H- JT/R Brand：Gleichmann Electronics Display Type：C→Character Type, G→Graphic Type Display Font：Character 16 words, 2 lines. Model serials no.
2. Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2)Don’t make extra holes on the printed circuit board, modify its shape or change the components of LCD module. (3)Don’t disassemble the LCM. (4)Don’t operate it above the absolute maximum rating. (5)Don’t drop, bend or twist LCM. (6)Soldering: only to the I/O terminals. (7)Storage: please storage in anti-static electricity container and clean environment. 3.
4.Absolute Maximum Ratings Item Symbol Min Typ Max Unit Operating Temperature TOP -20 － +70 ℃ Storage Temperature TST -30 － +80 ℃ Input Voltage VI VSS － VDD V Supply Voltage For Logic VDD-VSS -0.3 － 7 V Supply Voltage For LCD VDD-V0 -0.3 － 13 V 5.Electrical Characteristics Item Supply Voltage For Logic Supply Voltage For LCD Symbol Condition Min Typ Max Unit VDD-VSS － 4.5 5.0 5.5 V Ta=-20℃ － － 5.2 V Ta=25℃ － 3.7 － V Ta=70℃ 3.
.Optical Characteristics Item Symbol Condition Min Typ Max Unit (V)θ CR≧5 30 － 60 deg (H)φ CR≧5 -45 － 45 deg CR － － 5 － － T rise － － 150 200 ms T fall － － 150 200 ms View Angle Contrast Ratio Response Time Definition of Operation Voltage (Vop) Intensity 100％ Definition of Response Time ( Tr , Tf ) Non-selected Conition Selected Wave Non-selected Wave Selected Conition Non-selected Conition Intensity 10％ Cr Max Cr = Lon / Loff Vop 90％ 100％ Tr Driving Voltag
.Interface Pin Function Pin No. Symbol Level Description 1 VSS 0V 2 VDD 5.
.Contour Drawing &Block Diagram P2.54*17=43.18 1.8 18- 1.0 PTH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 13.2Max 8.6 G R B A 31.0 36.0 0.5 25.2 16.0(VA) 11.5(AA) 18.3 2.5 5.7 10.3 12.55 7.55 12.45 8.0 2.5 80.0 0.5 71.2 66.0(VA) 56.2(AA) 4.95 1.6 40.55 2.5 4- 2.5 PTH 4- 5.0 PAD 75.0 LED B/L 11.8 7.9 0.6 12 14.19 0.6 0.55 A B R G The non-specified tolerance of dimension is ¡ 0Ó.3 mm . 7.62 5.95 5.55 0.7 0.65 A B R G 12 3.55 2.
.Function Description The LCD display Module is built in a LSI controller, the controller has two 8-bit registers, an instruction register (IR) and a data register (DR). The IR stores instruction codes, such as display clear and cursor shift, and address information for display data RAM (DDRAM) and character generator (CGRAM). The IR can only be written from the MPU. The DR temporarily stores data to be written or read from DDRAM or CGRAM.
Display position DDRAM address 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 00 40 01 02 03 04 05 06 07 08 41 42 43 44 45 46 47 48 2-Line by 16-Character Display 09 0A 0B 0C 0D 0E 0F 49 4A 4B 4C 4D 4E 4F Character Generator ROM (CGROM) The CGROM generate 5×8 dot or 5×10 dot character patterns from 8-bit character codes. See Table 2. Character Generator RAM (CGRAM) In CGRAM, the user can rewrite character by program.
Relationship between CGRAM Addresses, Character Codes (DDRAM) and Character patterns Table 1.
10.Character Generator ROM Pattern Upper 4 bit Lower 4 bit LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHH LLLL CG RAM (1) LLLH (2) LLHL (3) LLHH (4) LHLL (5) LHLH (6) LHHL (7) LHHH (8) HLLL (1) HLLH (2) HLHL (3) HLHH (4) HHLL (5) HHLH (6) HHHL (7) HHHH (8) GE-C1602B-CFH-JT/R page 12/ 26 12.07.
11.Instruction Table Instruction Code Instruction Execution time Description (fosc=270Khz) RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Clear Display 0 0 0 0 0 0 0 0 0 1 Write “00H” to DDRAM and set DDRAM address to “00H” from AC 1.53ms 1.53ms Return Home 0 0 0 0 0 0 0 0 1 － Set DDRAM address to “00H” from AC and return cursor to its original position if shifted. The contents of DDRAM are not changed.
12.Timing Characteristics 12.1 Write Operation Ta=25℃, VDD=5.0V Item Symbol Min Typ Max Unit Enable cycle time TC 1200 － － ns Enable pulse width TPW 140 － － ns Enable rise/fall time TR,TF － － 25 ns Address set-up time (RS, R/W to E) tAS 0 － － ns Address hold time tAH 10 － － ns Data set-up time tDSW 40 － － ns tH 10 － － ns Data hold time GE-C1602B-CFH-JT/R page 14/ 26 12.07.
12.2 Read Operation Ta=25℃, VDD=5V Item Symbol Min Typ Max Unit TC 1200 － － ns TPW 140 － － ns TR,TF － － 25 ns Address set-up time (RS, R/W to E) tAS 0 － － ns Address hold time tAH 10 － － ns Data delay time tDDR － － 100 ns Data hold time tH 10 － － ns Enable cycle time Enable pulse width (high level) Enable rise/fall time GE-C1602B-CFH-JT/R page 15/ 26 12.07.
13.Initializing of LCM Power on Wait for more than 40 ms after VDD rises to 4.5 V BF can not be checked before this instruction. RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Function set 0 0 * * * * 0 0 1 1 Wait for more than 39us BF can not be checked before this instruction. RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 0 0 0 0 1 0 * * * * 0 0 N F * * * * * * Function set Wait for more than 39 µs BF can not be checked before this instruction.
Power on Wait for more than 40 ms after VDD rises to 4.5 V BF can not be checked before this instruction. RS R/WDB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Function set 0 0 0 0 1 1 N F * * Wait for more than 39us RS R/WDB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 0 0 0 0 1 1 N F * * BF can not be checked before this instruction.
14.Reliability Content of Reliability Test (wide temperature, -20℃~70℃ 70℃) Environmental Test Content of Test Test Item Test Condition Note High Temperature storage Endurance test applying the high storage temperature for a long time. 80℃ 200hrs 2 Low Temperature storage Endurance test applying the high storage temperature for a long time.
15.Backlight Information Specification PARAMETER SYMBOL Supply Current ILED MIN TYP MAX R 20 24 28 G 25 30 34 B 25 30 34 UNIT TEST CONDITION mA V=5.0V Supply Voltage V 4.9 5.0 5.1 V － Reverse Voltage VR － 7.
1 Backlight Drive Method The driving circuit of suggestion is showed as above, owing to B/L being designed In parallel mode, so user can use transistor、 、FET or TRIC to control. GE-C1602B-CFH-JT/R page 20/ 26 12.07.
16. Inspection specification NO 01 02 Item Criterion AQL Electrical Testing 1.1 Missing vertical, horizontal segment, segment contrast defect. 1.2 Missing character , dot or icon. 1.3 Display malfunction. 1.4 No function or no display. 1.5 Current consumption exceeds product specifications. 1.6 LCD viewing angle defect. 1.7 Mixed product types. 1.8 Contrast defect. 0.65 Black or white 2.1 White and black spots on display ≦0.25mm, no more than spots on LCD three white or black spots present.
NO Item 05 Scratches Criterion AQL Follow NO.3 LCD black spots, white spots, contamination Symbols Define: x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length: 6.1 General glass chip : 6.1.
NO Item Criterion AQL Symbols : x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length 6.2 Protrusion over terminal : 6.2.1 Chip on electrode pad : y: Chip width x: Chip length z: Chip thickness y≦0.5mm x≦1/8a 0＜z≦t 6.2.2 Non-conductive portion: 06 Glass crack 2.
NO Item 07 Cracked glass 08 09 10 Backlight elements Bezel PCB、COB Criterion AQL The LCD with extensive crack is not acceptable. 2.5 8.1 Illumination source flickers when lit. 8.2 Spots or scratched that appear when lit must be judged. Using LCD spot, lines and contamination standards. 8.3 Backlight doesn’t light or color wrong. 0.65 2.5 9.1 Bezel may not have rust, be deformed or have fingerprints, stains or other contamination. 9.2 Bezel must comply with job specifications. 10.
NO 12 Item General appearance GE-C1602B-CFH-JT/R Criterion AQL 12.1 No oxidation, contamination, curves or, bends on interface Pin (OLB) of TCP. 12.2 No cracks on interface pin (OLB) of TCP. 12.3 No contamination, solder residue or solder balls on product. 12.4 The IC on the TCP may not be damaged, circuits. 12.5 The uppermost edge of the protective strip on the interface pin must be present or look as if it cause the interface pin to sever. 12.
17. Material list of components for RoHS 1. The manufacturer hereby declares that all of or part of products (with the mark “/R” in code), including, but not limited to, the LCM, accessories or packages, manufactured and/or delivered to your company (including your subsidiaries and affiliated company) directly or indirectly by our company (including our subsidiaries or affiliated companies) do not intentionally contain any of the substances listed in EU-Directive 2002/95/EC.
