Manual

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com
8
sPeCifiCations
NOTE: Air flow & proper ventilation required for compressor 12” gap on sides for ventilation & to remove cover, 3” gap in rear for recirculation line hook-up, and 20” gap on top for ventilation and servicing. Top, front, & sides are one piece and are removable for servicing the compressor.
1.625"
Air Intake
On/Off Switch
Compressor Area (Under cover)
Exhaust
Exhaust
Exhaust
Exhaust
Electrical Cord & Plug
Removable
Cover-Pull
towards you
to remove
Screws to
remove cover
Air Intake
Removable Cover
FRONT SIDE REAR
TOP
26.75" 16.50"
22.25"
ISOMETRIC
14.375"
10.125" 12.125"
allow 20" clearance above unit to service compressor
note: compressor failure due to restriction or blockage of air flow will void warranty.