Installation

7
Side Mirror Kit parts list:
2 Mirror side panels to match the model height ordered
4 Side kit brackets with adhesive tape
6 2”x2” Black Foam Pads with peel off adhesive tape on
both sides
8 Screws, 10-32 x 1/2”
8 Screw Caps ( part # 434-00)
2 Alcohol Pads
Align mirror to level
with Top Edge
Side Mirror Bracket
Side Mirror Bracket
Side Mirror Bracket
Side Mirror Kit
Install Side Mirror Kit:
• Install brackets
• Install foam pads
on the cabinet
above, below and
in between
the brackets
• Clean back side of
mirror with
alcohol pads
• Peel-off paper
covering the
adhesive tape
on the brackets-
(this holds the
mirror in place)
• Align mirror
top and bottom
• Press firmly in place
(Do not try to remove
mirror as it will break)
2”x 2” Black
Foam Pads
with peel off
ahesive side
affix pads
to the
cabinet
Peel off paper
covering adhesive
Peel off paper
covering adhesive
To view a video showing helpful tips on how to install mirrored side
kits, please go to GlassCraftersMirroredCabinets.com and navigate
to the cabinet product that you are installing. Simply click on the
installation tab (located below the product images) to view our
installation videos.
Side Mirror Kit Installation
For surface mounted and semi-recessed
Mirrored Cabinets.
1) Attach the side mirror kit brackets thru the pre-
punched holes in your cabinet.
2) Try to use the rst row from the top and bottom of your
cabinet. Using the eight 10 -32 x 1/2” screws fasten the
brackets and nish with screw caps.
3) Attach the 2” x 2” foam pads to the outside cabinet
wall above, below and in between the position of the
brackets.
4) Clean the backside of the side mirror kit panel with
the Alcohol pads. Check alignment before you attach the
mirror to be sure it will align even with the top of the cab-
inet.
5) Peel off paper covering of the adhesive tape on the
side kit brackets pads. (This holds the mirror in place).
Carefully align the mirror to the cabinet evenly on all four
sides. Press rmly into place and attach to the side kit
mirror to the cabinet body.
(Note: Once installed, do not try to remove the mirror as it will break.)