Installation

12
Detail 14A
Detail 14B --
View from Inside
Detail 14C --
View from Outside
Slide the Center Guide under the Inside Door and
over the Curb Dam into position over the drilled
hole .
Screw into place with the Flathead Screws pro-
vided.
Inside Door
STEP 14. Turn the Curb Dam over. Remove the film
covering the double faced tape. Carefully align one
end of the Curb Dam to the pencil marks on the
wall and lower it into place to align with the pencil
marks on the curb. Fit the Center Guide into place
over the screw hole by sliding it over the Curb Dam
and under the Inside Door.
Retest the movement of the Door, side to side
through the Center Guide. Screw the Center Guide
into place and press the Curb Dam firmly into
place.
Screw the Center Guide into position with the
flathead screw provided and replace the plastic
cover for the screw location.
Double Faced Tape
Replace the plastic
cover for the Center
Guide