Installation Guide

Disassemble the cabinet door(s)
After taking out the cabinet, disassembling the
door(s).
The door(s) can be quickly removed by pushing the
button on hinge.
Unclipping the door from the mounting plate.
02
Construct the framing
IMPORTANT:
The dimensions of the cabinet body
may be vary from actual item. Please
measure the exact item before making
cutout.
When determining the height of the product, verify
that the doors will clear all obstacles (such as a
faucet or light fixture). A minimum distance of 3”
(76 mm) is required.
Measuring the cabinet body of exact item.
Using a jigsaw or keyhole saw, carefully remove
the finished wall material from the marked cutout.
Frame out the wall cavity. If needed, install a header.
01
Recessed Installation