Mirror Cabinet Installation Guide (Recessed and Wall Mounted Installation) For Models: Juno SC1-R-24 Juno SC1-R-28 Juno SC1-R-32 Aria SC1-AR-30X34 Aria SC1-AR-48X32
Before You Begin Caution: Risk of personal injury. Cabinets are very heavy. Get assistance for lifting and moving the cabinets NOTICE: Risk of property or product damage. The location of the cabinet is critical. Make sure that the door will clear all obstacles (such as a faucet or light fixture). Ensure that any obstacles behind the finished wall will not be damaged during the cutting and/or drilling process. IMPORTANT! Reroute any electrical wires or water supply piping from the wall cavity.
Thank you for your purchase. If for any reason you are having trouble with installation, or if the size of the product does not fit your designated space, please contact Glass Warehouse directly and do not return this product to place of purchase. Glass Warehouse takes pride in providing quality products and customer service.
Installation Guide X4 B D X7 C X7 E X7 15-1/4"(388 mm) Model SC1-R-24 (W: 24” / H: 24”:/ 1 Door) X1 F X4 G H X2 A X2 I J 4" X1 (1 03 "(405 m /4 14-3 m mm) ) X4 B X7 D C X7 E X7 17-5/8"(448 mm) Model SC1-R-28 (W: 28” / H: 28” / 1 Door) X1 F X4 G H X2 A X2 I J 4" X1 (1 03 "(465 /8 18-1 m mm) m ) X4 B X8 D C X8 E X8 X2 F G A I 20-5/8"(525 mm) Model SC1-R-32 (W: 32” / H: 32” / 1 Door) X8 X2 H J X3 X1 4" (1 03 2 m m) 30 m "(5 0-5/8 m
Installation Guide X4 B D X8 X8 E X8 X1 F X4 G A C 18-3/4” (476 mm) Model SC1-AR-30X34 (W: 30” / H: 34” / 2 Doors) H X2 I X4 J 4” X1 760 (1 30” ( 03 m mm) m ) X4 B D C X9 I A X9 X9 E X6 F G 22” (559 mm) Model SC1-AR-48X32 (W: 48” / H: 32” / 3 Doors) X 24 X2 H J X6 X1 4” (1 864 03 34” ( m mm) m ) Included in your purchase Preparation A B C D E F G H I J Measuring the cabinet body of the actual product.
WalI Mount Installation bottom slot I I J 3-4” J top slot opening 01 02 Disassemble the cabinet door(s) Installing the mounting brackets and mounting the Cabinet Body on wall (Please read the remarks carefully before starting) After taking out the cabinet, disassembling the door(s). The door(s) can be quickly removed by pushing the button on hinge. . Unclipping the door from the mounting plate.
Recessed Installation 01 02 Construct the framing Disassemble the cabinet door(s) Measuring the cabinet body of exact item. After taking out the cabinet, disassembling the door(s). Using a jigsaw or keyhole saw, carefully remove the finished wall material from the marked cutout. Frame out the wall cavity. If needed, install a header. IMPORTANT: The dimensions of the cabinet body may be vary from actual item. Please measure the exact item before making cutout.
Wood screws (4) 03 04 Install the cabinet body into the framing Install the glass shelf(shelves) Drill through the 4 Half-Drilled holes (With rivet nuts) for recessed installation by using 1/4” drill bit. Determine the shelf(shelves) locations and insert the slotted pins into the holes in the sides of the cabinet. Make sure hinges are on correct side of opening for left hand or right hand operation.
05 06 Reassembling the door(s) Adjusting hinges - To make the door(s) in correct position After install the glass shelf (shelves) in right position, reassembling the door(s). Clamp hinge on the mounting plate as shown by direction arrow. Press down the hinge arm to lock the plate as shown. Front to back adjustment - Turn the screw “A” clockwise or anti-clockwise for moving the door Inward or Outward. Lateral adjustment - Turn the screw “B” clockwise or anti-clockwise for moving the door Left or Right.
Care and Cleaning The cabinet door and interior are constructed of mirrored glass, steel and stainless steel. Use only a damp cloth to clean. Ammonia or vinegar based cleaners can damage mirrors. A solution of 50% of water and 50% of isopropyl alcohol is recommended fop mirror cleaning. A very mild detergent may be used to clean the surface. When cleaning, spray the cloth, not the cabinet, mirror, or surround surfaces. Do not use abrasive cleansers on any part of the cabinet.
Exclusive Limited Warranty Terms & Conditions. This warranty is effective as of JANUARY 1, 2019 on all Glass Warehouse product purchases PLEASE READ Glass Warehouse WARRANTY TERMS AND CONDITIONS BEFORE INSTALLING YOUR Glass Warehouse PRODUCT.
obligation shall be discharged upon tender of parts, replacement or repair of the product. Purchaser’s refusal to accept the tender terminates all warranty obligations and VOIDS THE WARRANTY. Cost of freight for returning products to Glass Warehouse for repairs or replacement under this limited warranty are the responsibility of the customer. Cost of freight associated with shipping of replacement product(s) or parts covered by this warranty is the responsibility of the original user.
Register Your Warranty Today! To activate your limited lifetime warranty, please visit: We will require this information within 30 days of purchase to complete the activation of your warranty.
